14T09013 | Low Pressure Copper

Lightweight and easy to install and proudly manufactured in New Zealand. This cylinder contains three inlets to choose from: bottom, left and right-hand sides. Plugs to seal off the unused inlets are supplied with the water heater
Rated for a maximum of 76kPa water pressure and indoor installation.
New Zealand Minimum Energy Performance Standards Compliant.

Please note that Rheem New Zealand advise this Low Pressure Copper hot water cylinder model is NOT suitable for installation in the postcode areas of 4120 and 4122 in the Hastings district due to local water conditions.

Approx. Storage Capacity	Dimensions	Installation Location	Element Rating
90 Litres	785 x 510mm HxW	Indoor	2.0 kW

Approx. Storage Capacity	90 Litres
Dimensions	785 x 510mm HxW
Installation Location	Indoor
Element Rating	2.0 kW

Product Specifications

Type

Low Pressure

Finish

Galvanised

Approx. Storage Capacity

90 Litres

Thermostat Setting Max

70 °C

Dimensions

785 x 510mm HxW

# People (Moderate Climate)

Thermostat Setting Min

60 °C

# People (Cold Climate)

Installation Location

Indoor

Country of Manufacture

New Zealand

Element Rating

2.0 kW

Water Connection Inlet & Outlet

RP ¾/20 mm

Element Type

Copper (T/P) Screw-In

Electrical Connection

240/50 V AC/ Hz

Weight Empty Approx

19 kg

Max Working Pressure

76 kPa

Inlet Connection

Triple

Domestic Warranty: Parts (Parts/Labour)

1 Year

Domestic Warranty: Cylinder/Tank (Labour)

1 Year

Domestic Warranty: Cylinder/Tank (Replacement)

5 Year

Non-Domestic Warranty: Parts (Parts/Labour)

1 Year

Non-Domestic Warranty: Cylinder/Tank (Labour)

1 Year

Non-Domestic Warranty: Cylinder/Tank (Replacement)

1 Year

Specifications Electric (@230V)

	Recovery on a 50°C Rise	AMPS
2.0 kW	34 litres per/hr	8.7
2.4 kW	40 litres per/hr	10.4
3.0 kW	51 litres per/hr	13.1
3.6 kW	62 litres per/hr	15.7
4.8 kW	82 litres per/hr	21.0
5.0 kW	85 litres per/hr	21.8
6.0 kW	103 litres per/hr	26.1
2 x 3.0 kW	103 litres per/hr	26.2
2 x 5.0 kW	171 litres per/hr	43.6